As an innovator in applied engineering, John Crane is well equipped to address the unique and challenging requirements of the pharmaceutical industry. We engineer our products to meet the industry’s safety and reliability standards — as well as local environmental regulations — so that our chemical processing customers can increase their uptime and lower their license fees. From clean-in-place components to batch documentation and certification of material integrity, John Crane provides pharmaceutical processing companies with the engineered components and services they need.
Recommended for You
Field-tested Solutions
John Crane is a recognized world leader in the design, manufacture and supply of solutions for pharmaceutical processors. Our Technology Testing Centers represent the industry’s most advanced development facilities. To maintain ISO 9001:2008 certification, we test our components using element analysis tools — CSTEDY and CTRANS — that simulate seal face behavior in real-world conditions.
Through rigorous testing and continual improvement, we’ve designed a number of industry-specific components that help optimize performance, efficiency and reliability. Some address specific fluid-handling problems, while others mitigate friction, wear and contamination with non-contacting, spiral groove lift-off technology. Many of our products even provide 100 percent containment of fugitive emissions, and we have more than 200 global rapid-response facilities available anytime for service, support and repair.
Pharmaceutical Industry Services
In addition to our highly engineered seals and bearings, John Crane also offers a range of services designed to help improve reliability and reduce total cost of ownership:
Maintenance and Repair Services
John Crane’s Maintenance and Repair Services assists with critical systems checks and plant equipment maintenance as well as repair, removal and reinstallation services.
Learn more
Mechanical Seals Reliability Programs
John Crane’s Mechanical Seals Reliability Programs assess equipment reliability and performance, analyze root cause failures and recommend strategies for improvement.
Learn more
Asset Management Solutions
John Crane’s Asset Management software offers customers a holistic view of their current systems to help spot unleveraged opportunities.
Learn more
Product Training
John Crane provides a wide range of training courses that cover the correct procedures for installing, operating and maintaining equipment components.
Learn morePharmaceutical Products
Showing 1–28 of 28 products
Type 7828 (G, GD)
Modular Gas-lubricated Cartridge Seal for Mixer and Agitator Applications
Type 7828 is part of the 7800 Vessel Seal Family. The 7800 family consists of heavy-duty, dual-pressurized, back-to-back, pusher...
Type 7700
Modular Wet or Dry Running Face-to-Face Cartridge Seal for Mixer and Agitator Applications
The heavy-duty Type 7700 is design-specific to serve critically important vessels in batch or continuous processes.
Type 32i
Single Dry-running Mixer and Agitator Seal with Novel Noise-reduction Technology
Please see Type 32 product description for technical information of the Type 32 seal family. In contrast to Type 32,...
Type 5280 (W, D, G, GD)
Modular, High-performance, Hygienic Design Agitator Seal for Steel Vessels
Type 5280 vessel seals apply Qualified Hygienic Design (QHD) and GMP standards and guidelines to enable the cleaning and sterilization of the product...
Type CK 725 (W,D)
Mixer and Agitator Cartridge Seal to Vessel Seal Standard DIN 28138 for Steel Chemical Reaction Vessels — No Bearing Integrated
The Type CK 725 is a dual-pressurized, cartridge seal for top-entry mixing and agitating equipment.
Type CK 726 (W,D)
Mixer and Agitator Cartridge Seal to Vessel Seal Standard DIN 28138 for Steel Chemical Reaction Vessels — with Integrated Bearing
The Type CK 726(W/D) is a dual-pressurized, cartridge seal for top-entry mixing and agitating equipment.
Type CK 728 (W, D, G, GD)
High-performance Modular Mixer and Agitator Seal for Steel Chemical Reaction Vessels — Standard Solutions Comply to Vessel Seal Standard DIN 28138
Type CK 728 is a versatile, high-performance cartridge seal solution for steel vessels applicable in various industries, including high-purity pharmaceutical...
Type CK 736 (W,D)
Mixer and Agitator Cartridge Seal to Vessel Seal Standard DIN 28138 for Glass-lined Chemical Reaction Vessel — with Integrated Bearing
The Type CK 736 is a dual-pressurized, cartridge seal for glass-lined mixing and agitating equipment with a top-entry agitator shaft.
Type CK 738 (W, D, G, GD)
High-performance Modular Mixer and Agitator Cartridge Seal for Glass-lined Chemical Reaction Vessels — Standard Solutions Comply to Vessel Seal Standard DIN 28138
Type CK 738 is a versatile, high-performance cartridge seal solution for glass-lined vessels applicable in various industries, including high-purity pharmaceutical...
Type 75FS
Dry-running Fully Split Mixer Seal
The Type 75FS dry- or wet-running fully split mechanical seal is designed specifically to eliminate process contamination and significantly reduce...
Type 586
Heavy-duty Cartridge Seal for Flue Gas Desulphurization
The Type 586 is a single, stationary cartridge-mounted seal assembly designed to contain the thick, corrosive and erosive slurries typically...
Type 5610/5610Q/5610L
Universal Cartridge Seal Family — Single Cartridge O-Ring Seal
The first truly universal cartridge seal, the Type 5610 will change your approach to sealing. Since the 5600 Series components...
Type 4610
Compact, General-duty, Single Cartridge O-ring Seal
The Type 4610 single cartridge seal, available off-the-shelf the world over, combines affordability with fluid-sealing dependability...
Type 2800E
Non-contacting, Gas-lubricated Seals for Small-bore Rotating Equipment
The rotating mating ring features micromachined spiral grooves that compress an inert barrier gas and create a lifting force on...
WCH
Water-cooled Heat Exchangers
Water-cooled heat exchangers may be applied where water is readily available. Heat exchangers may be packaged together with seal support...
WCV
Water-cooled Heat Exchangers
Water-cooled heat exchangers may be applied where water is readily available. Heat exchangers may be packaged together with seal support...
K2S
Water-cooled Heat Exchangers
Water-cooled heat exchangers may be applied where water is readily available. Heat exchangers may be packaged together with seal support...
GR1/1C
Reservoirs for Chemical, Pharmaceutical and General Industries
Stainless steel pressure vessels (with or without internal cooling coil) designed for general industry applications. These reservoirs provide buffer/barrier fluid...
GR2/2C
Reservoirs for Chemical, Pharmaceutical and General Industries
Stainless steel pressure vessels (with or without internal cooling coil) designed for general industry applications. These reservoirs provide buffer/barrier fluid...
GR3/3C
Reservoirs for Chemical, Petrochemical, Pharmaceutical and General Industries
Stainless steel pressure vessels (with or without internal cooling coil) designed for general industry applications. These reservoirs provide buffer/barrier fluid...
GP-S/GP-D
Gas Panels for Chemical, Pharmaceutical and General Industries
Non-API gas control panel to filter, regulate and monitor gas supply to gas-lubricated pump seals....
Cyclone Separators
Cyclone separators are a device for removing particles from a seal flush line to protect the seal from the abrasive wear or clogging...
Safeunit™ Ultima
Seal Water Control and Monitoring System
Safeunit Ultima is specially designed to control seal water flow and pressure in extreme conditions. This makes it ideal for...
Safeclean
Seal Water Filter System
Plant seal water filtration system, maintaining clean water supply to improve the reliability mechanical seals and gland packing and also...
A Series Close-coupled Arrangement
Close-coupled Wrap-fit Urethane Element Coupling
John Crane A Series couplings provide a solution to one of the most persistent and troublesome problems facing maintenance personnel: periodic...
C1056/C1057
Food and Pharmaceutical PTFE Braided Packings
John Crane styles C1056 and C1057 are specifically designed to service the food and beverage as well as chemical and pharmaceutical industries...
CVU/CVH
Automatic PTFE Packing Rings
John Crane CVU and CVH sets cover a wide range of fluids, including acids, caustics and solvents at high temperatures...
CIP Star-Shaped Elements
John Crane’s Seebach® CIP (clean in place) elements are used in the pharmaceutical industry. They are fully welded cylindrical filter elements which are made of…