MPF
Automated Backflush, High-Flow Filter
The MPF filter series helps to prevent contamination problems by effectively removing suspended solids from process water from coarse particles down to very low levels (~1 mg/litre or 1 ppm). Highly effective metallic media and automated systems provide a constant supply of cleaned water up to very high flow rates of 800 l/min (210 gpm) as well as automatic backwashing with simultaneous forward filtration. It promotes water conservation efforts in plants since it is capable of treating contaminated recycle water.
×
Recommandé pour vous
Caractéristiques
- California Residents: PROPOSITION 65 WARNING
- Filtration rating at 25 µm or 50 µm at 98% Efficiency
- Process flow rates from 250-800 l/min with up to 4 units connected in parallel (flow rate up to 3200 l/min), under one master control system
- Efficient automatic backflush with element lifetime longer than 12 months
- Control system runs, monitors and logs essential data
- Metallic wire fine-mesh filter enables removal of suspended solids in the water
Paramètres
- Temperature Limits
- 0-100 °C (32-212 °F)
- Pressure Limits
- Minimum feed pressure (at filter inlet) typical 4-5 bar (58-72 psi)
Maximum operating pressure 16 bar (232 psi)
Backflush trigger differential pressure typical 2-3 bar (29-45 psi)
Maximum differential pressure 6 bar (87 psi) - Flow Rate
- 250-800 l/min
Connect up to 4 units for maximum 3200 l/min
Applications recommandées
- Water for pump seals and process water re-use
- Gland water, dust suppression and tailings water
- Protection for reverse osmosis systems
- Cleanup of incoming surface water to plants
Documents et téléchargements
Contact Us
Des centaines d’experts en ingénierie. Plus de 200 sites répartis sur la planète. Offrir l’innovation et les services pour vous aider à réussir.