Filtres de remplacement Indufil
John Crane’s Indufil® Replacement Filter Elements
![](/-/media/j/johncrane_com/images/products/filtration-systems/filter-elements/filterelement_1.jpg?w=800&h=800&bc=ffffff&r=eafef149-d305-4e68-87be-cf8175f366b9&hash=0BE2B88500ECEC2D1149F2AA280730B8)
The performance of a filter unit is entirely dependent on the elements fitted, making it essential to fit genuine John Crane’s Indufil® filter elements. During the design stage of the equipment, John Crane’s Indufil products have been selected for patented design features that provide specified performance levels. Fitting non-genuine filter elements may well invalidate warranties from both John Crane and the OEM for the complete installation.
The combination of patented features and materials has a major influence on both performance and the pressure drop over the filter unit — the goal being to maximize run time between change-outs. John Crane’s Indufil filters typically exceed industry requirements, including API standards. Large stocks of replacement elements are available and can usually be dispatched within hours of receiving an order.
![](/-/media/j/johncrane_com/images/products/filtration-systems/filter-elements/filterelement_1.jpg?w=800&h=800&bc=ffffff&r=eafef149-d305-4e68-87be-cf8175f366b9&hash=0BE2B88500ECEC2D1149F2AA280730B8)
Recommandé pour vous
Caractéristiques
- California Residents: PROPOSITION 65 WARNING
- Particle filtration down to 1 micron, with efficiencies up to 99.9% (ß1>1000)
- Liquid from gas removal down to 0.01 ppm
- Large variation in materials and designs to comply with any customer requirement
- Local support via nearest John Crane representative
Paramètres
- Standard Materials
- Zinc-plated carbon
Stainless steel alloys
Glassfibre
Polyfibre
Stainless steel - Differential Pressure Limits
- Liquid: minimum 5 bar(g)
Gas: minimum 8 bar(g) - Temperature Limits
- -320°F to 752°F/-196°C to 400°C