Use our new estimator tool to calculate your water and CO2 emissions savings
In oil and gas applications, reliability and safety are essential. To support the industry’s highly regulated, mission-critical operations, John Crane offers a wide range of innovative services and applied engineering solutions. Our experienced sales and engineering staff help select, design and apply sealing systems for even the most challenging conditions, and John Crane products meet the highest industry standards for containment of fugitive emissions. We also have 90+ test rigs available to ensure components can operate with maximum reliability when subjected to specific environmental conditions. And with more than 200 global rapid-response locations, assistance is available whenever and wherever our customers need it.
Recommended for You
Upstream — Oil and Gas Extraction
Offshore platforms and onshore oil and gas extraction facilities often operate in remote locations where storage space is limited and application conditions are extreme. And because equipment failure can have dire consequences — jeopardizing costs, environmental safety and energy resources — these mission-critical operations require reliable engineered components that can withstand extreme temperatures, high pressures, corrosion and erosion over a long period of time. John Crane not only engineers products with proven long-term success under these conditions; we also offer a wide range of assistive services that help maximize application reliability.
Midstream/Downstream — Processing, Pipelines and Refining
Due to the volatile and hazardous nature of midstream and downstream oil and gas materials, every pump, compressor, turbine and mixer depends on innovative engineered components to optimize safety and emission containment. John Crane engineers products specific to abrasive conditions, pressure changes, and multi-phase fluid properties to maximize uptime and minimize emissions. If service, repair or refurbishment are ever needed due to planned or unplanned maintenance, we also have over 200 global rapid-response locations ready to dispatch specialized assistance at any time.
Oil and Gas Industry Services
We also offer deliver reliability through a number of additional services:
Maintenance and Repair Services
John Crane’s Maintenance and Repair Services assists with critical systems checks and plant equipment maintenance as well as repair, removal and reinstallation services.
Learn more
Mechanical Seals Reliability Programs
John Crane’s Mechanical Seals Reliability Programs assess equipment reliability and performance, analyze root cause failures and recommend strategies for improvement.
Learn more
Asset Management Solutions
John Crane’s Asset Management software offers customers a holistic view of their current systems to help spot unleveraged opportunities.
Learn more
Product Training
John Crane provides a wide range of training courses that cover the correct procedures for installing, operating and maintaining equipment components.
Learn moreOil and Gas Products
Showing 1–42 of 42 products
Type 8648VRS
Single and Dual Non-pusher Elastomer Seal
Type 8648VRS is a standardized non-pusher elastomer mechanical seal using patented technology, designed specifically for difficult hydrocarbon oil pipeline applications. It is designed specifically with…
Type 48LP
Low-emission, Low-pressure O-ring Shaft Seal for Light Hydrocarbon Services
Type 48 seals evolved from the successful, proven John Crane Type 8B1 design, the preferred choice for safe, reliable, unpressurized...
O-ring Pusher Seals
John Crane offers a range of O-ring pushers seals to suit a huge variety of applications. Our products range from simple low-cost component seals up…
Type RREP / RRDP
High-performance Multi-spring Seal
Designed for high-pressure and high-speed applications, the RREP is suited to a whole host of refinery and process industry duties,...
Type 5610/5610Q/5610L
Universal Cartridge Seal Family — Single Cartridge O-Ring Seal
The first truly universal cartridge seal, the Type 5610 will change your approach to sealing. Since the 5600 Series components...
Type 604
High-temperature, Stationary Edge-welded Metal Bellows Seal
The Type 604 is a high-temperature, general-purpose, stationary edge-welded metal bellows assembly for applications to 425C/800F. Available in either AM350...
Type 606
High-temperature, Rotating Edge-welded Metal Bellows Seal with Drive Lugs
The Type 606 is a high-temperature (to 425°C/800°F) rotating seal with the same high-strength design features as the Type 609....
Type 609
High-temperature, Rotating Edge-welded Metal Bellows Seal
The Type 609 is a high-temperature (to 425°C/800°F) rotating seal head assembly that incorporates all of the rugged features of...
Type 670
Low-temperature, All-Alloy C-276 Metal Bellows Shaft Seal for Highly Corrosive Fluids
The Type 670 is an all-Alloy C-276 rotating bellows seal, providing high strength and excellent corrosion resistance. It is...
Type 2874
Non-contacting Dual Gas Seal Cartridge for Pumps
The Type 2874 is an internally pressurized, gas-lubricated, non-contacting dual cartridge seal designed for use in API, ANSI and DIN...
Type 28SC
Non-contacting Secondary Containment Seal
The 28SC is a gas-lubricated, non-contacting secondary containment seal, which is applied as a component of a multiple seal...
Type 28ST
Non-contacting Gas Seal for Steam Turbines
Type 28ST combines proven rotating groove technology and high-temperature secondary seals to reduce steam leakage by nearly two orders of...
Type 2648
API 682-qualified, Dual Unpressurized Cartridge, Type "A" O-ring Pusher Seal
The Type 2648 is a high-performance, low-emission cartridge seal designed to provide additional safety for hazardous applications and applications where...
Type 3648
API 682-qualified, Dual Pressurized Cartridge, Type "A" O-ring Pusher Seal
The Type 3648 is a high-performance, low-emission cartridge seal designed for maximum containment of hazardous fluids and light hydrocarbons. Its...
Type 1670
API 682 Category II and Category III, Type B, Arrangement 1 Single Rotating Metal Bellows Cartridge Seal
The Type 1670 is a factory pre-set edge-welded metal bellows API 682 qualified cartridge seal with Alloy C-276 (UNS N10276)...
Type 2609HTL/3609HTL
Dual Unpressurized and Pressurized Rotating Bellows Cartridge Seals (API 682 Type C, Arrangement 2 and 3)
Type 2609HTL is a dual unpressurized rotating bellows cartridge seal API 682 Type C, Arrangement 2. Type 3609HTL is a...
Type 2609HTC/3609HTC
Dependable API 682 Cartridge Seals
The Type 2609HTC and Type 3609HTC are dependable API 682 cartridge seals that utilize two impressive design innovations by...
Type 3604/3604HTC/3604HTCDP
API 682 Type C, Arrangement 3, Stationary Metal Bellows Cartridge Seal
The Type 3604/3604HTC/3604HTCDP is a highly reliable dual face-to-face stationary cartridge seal for high-temperature refinery services that is fully API...
Type 1604
Single Stationary API 682 Metal Bellows Cartridge Seal Type C, Arrangement 1
The Type 1604 high-temperature, high-performance Type C, Arrangement 1, API 682 qualified cartridge seal is designed for high-temperature applications such...
Type 1604HTC
Single Stationary Welded Metal Bellows API 682 Cartridge Seal Type C, Arrangement 1
The Type 1604HTC is an API 682 qualified single stationary bellows cartridge seal Type C, Arrangement 1. The Type...
ECS®
Metal Bellows Dry-running Secondary Emission Containment Seal
Available in low- and high-temperature designs, the ECS® is a dry-running seal for emission containment and safety/backup that successfully controls...
TDK/TSK/TLK
T Series Stainless Steel Discs in Pre-assembled Cartridge for Medium to High Torque Applications (Metric)
John Crane’s Metastream TDK/TSK/TLK Series are metallic membrane (disc) couplings, incorporating industry...
PR 52/PR 53A
Reservoirs
These reservoir-based seal support systems are designed for both API Plan 52 and 53A applications to support unpressurized and pressurized...
PA 53B
Accumulator-based System
53B accumulator-based seal support systems utilize a bladder to maintain system pressure to pressurized dual seals and absorb barrier fluid...
PA 53C
Accumulator-based System
53C accumulator-based seal support systems utilize a piston to maintain system pressure to pressurized dual seals and absorb barrier fluid...
RU-2/RU-4
Mobile Refilling Units
Portable units enable refilling of a seal reservoir or buffer/barrier fluid circuit while...
PL 54/55
Lubrication Systems
PL 54/55 lubrication systems provide a positive flow and pressure of pressurized or unpressurized barrier/buffer fluid to dual seals. This...
WCH
Water-cooled Heat Exchangers
Water-cooled heat exchangers may be applied where water is readily available. Heat exchangers may be packaged together with seal support...
WCV
Water-cooled Heat Exchangers
Water-cooled heat exchangers may be applied where water is readily available. Heat exchangers may be packaged together with seal support...
K2S
Water-cooled Heat Exchangers
Water-cooled heat exchangers may be applied where water is readily available. Heat exchangers may be packaged together with seal support...
PD 75
Leakage Detection
Used to detect and monitor leakage of the inboard seal, these seal support systems can detect liquid leakage (API Plans...
PD 76
Leakage Detection
Used to detect and monitor leakage of the inboard seal, these seal support systems can detect liquid leakage (API Plans...
PD 65A/PD 65B
Leakage Detection
Used to detect and monitor leakage of the inboard seal, these seal support systems can detect liquid leakage (API Plans...
PG 72
Gas Panels
Used to provide a clean, regulated gas supply to a dual unpressurized seal arrangement where the containment seal is dry...
PG 74
Gas Panels
A PG 74 (API Plan 74) system provides a clean, dry, regulated supply of pressurized barrier gas...
1655C/1627/G57
High-temperature Carbon Braided Packings
John Crane styles 1627, 1655C and G57 are high-performance braided packing offerings which have the ability to perform in...
894/1340
General-service Braided Graphite Packings
John Crane styles 894 and 1340 are cost-effective graphite general-service packing constructed of the highest-quality synthetic fibers and...
K1730/K1761/K1771
Abrasive Service Aramid and Meta-aramid Packings
John Crane styles K1730, K1761 and K1771 are constructed of high-tensile strength, abrasion-resistant fibers. Servicing a wide range of...
Aura® 120NS
Narrow Section Dry Gas Seal
Do you want to retrofit to the latest gas seal technology? Aura® 120NS eliminates oil lubrication and the resulting need to address methane that has become…
Type 28AT
Non-contacting Gas Seal for Turbo Compressors
Type 28AT: The original gas seal, with a design pedigree stretching back over 30 years and evolving gradually, installed and...
Type 28XP
Non-contacting Gas Seal for Turbo Compressors
Type 28XP: Possibly the most popular seal in the range today, the Type 28XP builds on the 28AT design and...
Type 28EXP
Non-contacting Gas Seal for Turbo Compressors
Type 28EXP: The product for the most challenging and hostile environments with proven and independently audited performance to 425 bar(g)....